Dahua NVRPRO User Manual page 76

Parameter
CAM 1 to CAM
16
Open all /close
all
Local play
Refresh
Please left click one monitor to view real-time video, the monitor window is shown as in Figure
8-5.
Please refer to the following sheet for monitor window parameter information.
Parameter
Display device
information
Digital zoom
Change show
mode
Local record
Snapshot
Audio
Close video
Function
channel 1 to channel 16
Click this button to open all video channels.
Once all video channels are open, it becomes close all button.
Click local play button to select file to play in PC.
Click this button to refresh monitor channel name.
Figure 8-5 Real-time Monitor
Function
1: NVR IP address.
2: Channel number.
3: Bit stream.
4: Bit stream decode type.
S1: Overlay.
S2: Off stream.
S3:GD1
H1: Overlay
H2: off stream decoding from the display card.
Click this button and then left drag the mouse in the zone
to zoom in. Right click mouse system restores original
status.
Resize or switch to full screen mode.
When you click local record button, the system begins
recording. The recorded file is saved to system folder: \
RecordDownload(default).
You can snapshoot important video. All images are
memorized in system folder: \ picture download (default).
Turn on or off audio.
Close video in current window.
82