Dahua NVRPRO User Manual page 94

Parameter
Password
Remote Path
Channel
Period
info.
Setup
Copy
NTP
The NTP interface is shown as in Figure 8-30.
Here you can realize network time synchronization. Please enable current function and then input
server IP, port number, time zone and time.
Please refer to the following sheet for detailed information.
Function
The password you need to login the server.
Remote storage file path.
Select a monitor channel .
In NAS interface, click set button, you can go to the
corresponding setup interface. See Figure 7-29
.Please set schedule period and then select
corresponding record type: schedule/alarm. Please
note device does not support motion detect record
function now.
Please select date (Current setup applies to current
day by default. You can draw a circle before the
week to apply the setup to the whole week.)
After complete setup, please go back to Figure 7-28
and then click save to save current time period
setup..
User can use this shortcut to copy the storage state of a
channel to another (or all other channels)
Figure 8-30 NTP
100