Default - Dahua NVRPRO User Manual

In Figure 6-51, click modify button after channel. You can see an interface shown as in Figure
6-52. Please note all your modification here applies to local end only. You need to refresh web or
client-end to get the latest channel name. System max support 25-digital character.
In tour mode, you can see the following interface. On the right corner, right click mouse or click
shift button, you can control the tour. There are two icons:
and stands for disabling window function. See Figure 6-53.

6.6.10 Default

Click default icon, system pops up a dialogue box. You can highlight
setup.
Select all
General
Encode
Schedule
RS232
Network
Alarm
Detect
Pan/tilt/zoom
Display
Channel name
Figure 6-51
Figure 6-52
stands for enabling window switch
Figure 6-53
to restore default factory
64