Installing This Product; Installation Notes - Pioneer AppRadio SPH-DA210 Installation Manual

Installation

Installing this product

Installation notes

• Do not install this product in places sub-
ject to high temperatures or humidity, such
as:
– Places close to a heater, vent or air con-
ditioner.
– Places exposed to direct sunlight, such
as on top of the dashboard.
– Places that may be exposed to rain, such
as close to the door or on the vehicle's
floor.
• Install this product in an area strong
enough to bear its weight. Choose a po-
sition where this product can be firmly
installed, and install it securely. If this
product is not securely installed, the cur-
rent location of the vehicle cannot be dis-
played correctly.
• Install this product horizontally on a sur-
face within 0 to 60 degrees tolerance. Im-
proper installation of the unit with the
surface tilted more than these toleranc-
es increases the potential for errors in
the vehicle's location display, and might
otherwise cause reduced display perfor-
mance.
60°
• When installing, to ensure proper heat
dispersal when using this unit, make
sure you leave ample space behind the
rear panel and wrap any loose cables so
they are not blocking the vents.
Leave ample
5 cm
space
5 cm
• Do not squeeze this product into the
holder. It may damage the front panel.