LanParty X48 User Manual page 88

3
BIOS Setup
SB 1.05V Voltage
The options are 1.05V, 1.133V, 1.217V and 1.3V.
SB Core/CPU PLL Voltage
The options are 1.5V, 1.6V, 1.7V and 1.8V.
NB Core Voltage
The options are 1.25V to 1.55V.
CPU VTT Voltage
This field is used to select the CPU's voltage.
Vcore Droop Control
This field is used to enable or disable the Vcore Droop control.
Clockgen Voltage Control
This field is used to select the clock generator's voltage.
GTL+Buffers Strength
This field is used to configure the GTL+Buffers Strength.
Host Slew Rate
This field is used to configure the Host Slew Rate.
GTL REF Voltage Control
The options are Enabled and Disabled.
CPU GTL 1/3 REF Volt and CPU GTL 0/2 REF Volt
These fields are used to configure the CPU GTL REF voltage.
Northbridge GTL REF Volt
This field is used to configure the Northbridge GTL REF voltage.
8 8