LanParty X48 User Manual page 76

3
BIOS Setup
Resume By Alarm
Enabled
Disabled
Day (of Month) Alarm
0
1-31
Time (hh:mm:ss) of Alarm
This is used to set the time you would like the system to power-on.
HPET Support
This field is used to enable or disable HPET.
HPET Mode
This field is used to select the HPET mode.
WDRT Support
This field is used to enable or disable WDRT.
WDRT Run/Stop and WDRT Count
These fields are used to configure WDRT.
7 6
When Enabled, you can set the time you would like
the Soft Power Down (Soft-Off) PC to power-on in
the "Time (dd:hh:mm) of Alarm" field. However, if the
system is being accessed by incoming calls or the
network prior to the time set in the field, the system
will give priority to the incoming calls or network.
Disables the automatic power-on function. (default).
The system will power-on everyday according to the
time set in the "Time (hh:mm:ss) Alarm" field.
Select a date you would like the system to power-
on. The system will power-on on the set date, and
time set in the "Time (hh:mm:ss) Alarm" field.