Resources Controlled By - LanParty X48 User Manual

PnP/PCI Configurations
This section describes configuring the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.

Resources Controlled By

x IRQ Resources
PCI/VGA Palette Snoop
PCI Latency Timer (Per 8CLK)
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
↑↓→←
: Move
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Resources Controlled By
The Award Plug and Play BIOS has the capability to automatically
configure all of the boot and Plug and Play compatible devices.
Auto(ESCD) The system will automatically detect the settings for
Manual
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Auto(ESCD)
Press Enter
Disabled
8
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Enter: Select +/-/PU/PD: Value
F6: Fail-Safe Defaults
you.
Choose the specific IRQ in the "IRQ Resources"
field.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
7 7