LanParty X48 User Manual page 67

SATA Mode
This field is used to configure the SATA devices supported by the
Intel ICH9R.
IDE This option configures the Serial ATA drives as Parallel
ATA storage devices.
RAID This option allows you to create RAID or Intel Matrix
Storage configuration on Serial ATA devices.
AHCI This option allows the Serial ATA devices to use AHCI
(Advanced Host Controller Interface).
Legacy Mode Support
The options are Enabled and Disabled.
Onboard JMB363 Controller
This field is used to enable or disable the onboard JMicron JMB363
controller.
Controller Mode
This field is used to configure the SATA devices supported by the
JMicron JMB363. The options are AHCI+IDE, RAID+IDE and Native
IDE.
3
BIOS Setup
6 7