LanParty X48 User Manual page 82

3
BIOS Setup
Boot Up Clock
This field is used to select the boot up clock.
DRAM Speed
This field is used to select the clock speed of the DIMM.
Target DRAM Speed
This field will show the targeted DRAM speed.
PCIE Clock
This field is used to select the bus clock of the PCI Express.
Voltage Setting
Refer to the following pages for more information on this submenu.
PCIE Slot Config
This field is used to configure PCI Express.
CPU Spread Spectrum
The options are Disabled, -0.5%, +-0.25%, -1.0% and +-0.5%.
PCIE Spread Spectrum
The options are Disabled, -0.5%, and -1.0%.
SATA Spread Spectrum
The options are Enabled and Disabled.
8 2
Important:
Selecting an external bus clock other than the default setting
may result to the processor's or system's instability and are not
guaranteed to provide better system performance.