Delete Button And Delete Indicator - Kodak DCS 410 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DELETE Button and Delete Indicator

You use the DELETE button to delete the most recent image on the
PCMCIA card.
IMPORTANT: If you inadvertently delete images, an emergency procedure
provides an opportunity for you to recover images if you do so before making any
additional images. Refer to the explanation of the R button in Chapter 8.
ECOVER
To use the DELETE button, if you are not connected to a computer or the
AC battery charger/adapter, first turn on the camera and lightly press the
shutter release button to wake the camera. (If you are connected to a
computer that is "on," or to the AC battery charger/adapter, the camera
back will be "on;" you do not need to turn on the Nikon N90s camera.)
Then press DELETE once to wake delete mode. The characters "DEL" —
the delete indicator — appear on the camera back LCD. Then press
DELETE again to delete the last image.
As long as the characters "DEL" appear on the LCD, you can press the
DELETE button again and again to delete additional images. With each
press the frames remaining indicator on the camera back increases by
one, indicating that there is now room for one additional image on the
PCMCIA card. The frame counter in the viewfinder does not change as a
result of deleting an image.
© G
7-12 Reference — Camera