Working With Images In The Studio - Kodak DCS 410 User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Working with Images in the Studio

This section is a tutorial on using the camera in a studio setting to take
new images.
NOTE: The earlier part of this chapter describes how you can work with images
on a PCMCIA card in the camera. All features described there also apply to studio
work (and are not repeated below), so we encourage you to review the earlier
sections of this chapter.
1. With the camera connected to your computer, access the driver image
window as described earlier in this chapter.
2. Choose C
connected camera.
3. Choose T
which is always the most recent picture you take with the camera
after choosing T
IMPORTANT: In T
card in the camera unless you click the K
instead, images are displayed in the image area one at a time. Each new
image you take replaces the previous one, which is lost.
©
6-26 Accessing Camera Images
from the S
AMERA OURCE
S from the V
EST HOT IEW
S .
EST HOT
S , images you take are not saved to the PCMCIA
EST HOT
G
menu to work with images from a
menu. This displays a single image
button as described below;
EEP