Kodak DCS 410 User Manual page 180

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trouble
You are losing images
from the PCMCIA card.
Image data on the
PCMCIA card have
become corrupted; you
are unable to access the
image data.
©
7-38 Reference — Camera
Possible Cause
An error occurred on
the card.
You may be using an
improper SCSI cable to
connect the camera
system to your
computer.
Your SCSI chain is not
terminated properly.
The files have become
corrupted for an
unknown reason.
G
Suggested Solution
Turn off the camera so that the
camera back goes off. Turn on the
camera and retry the operation. If
you continue to have problems,
reformat the PCMCIA card with
the Format button on the camera
control dialog box of the software
driver. (This will erase all existing
images from the card.)
If the problem persists, contact
Kodak.
Use only the supplied SCSI cables
(or other cables as specified in
Chapter 4 to attach the camera or
other peripherals to the computer.
Ensure that the SCSI chain is
terminated properly as described
in Chapter 4.
If you have access to an IBM PC
or compatible computer with a
PCMCIA card reader and disk
utility software, you may be able
to recover image and sound files
with that utility software.
If that computer system is
unavailable or that action is
unsuccessful, you may need to
format the disk with the camera,
an operation which will erase all
of your data on the card.