Kodak DCS 410 User Manual page 94

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Select any of the three automatic film advance modes — single frame
shooting (S), continuous low-speed shooting (L), or high-speed shoot-
ing (H). To do so, hold down the film advance mode (DRIVE) button
while rotating the command input control dial.
NOTE: The L and H settings provide essentially the same shooting rate.
5. Choose other settings as desired, with the exceptions noted below:
©
©
©
5-4 Using the Camera
MODE
ISO
DRIVE
Film advance mode button
Multiple exposure mode is not supported. Only the first exposure
will be recorded.
You will not be able to shoot when the camera is in S focus
(Single Servo AF with Focus-Priority), if the camera cannot focus.
G
Film advance mode
OFF
S
Command input control dial