Kodak DCS 410 User Manual page 270

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message
"You can not
simultaneously crop
images of different sizes.
Select groups of images
that all have the same
dimensions, and try
again."
"You clicked on an area
that is too saturated to use
for color balancing. Use
the Click Balance tool
again to select a less
saturated area."
8-74 Reference — Kodak Driver Software
©
Possible Cause
You can not
simultaneously crop
multiple images from
different camera types.
The DCS 410, DCS 420,
and EOS•DCS 5 are the
same camera types; the
NC 2000, NC 2000e,
and EOS•DCS 3 are the
same camera type; and
the DCS 460, DCS 465,
and EOS•DCS 1 are the
same camera type.
Although the driver can
display images from all
camera types, you can
not simultaneously crop
images from different
camera types.
After choosing the Click
Balance tool, you have
clicked the crosshair on
an overexposed area of
the image.
G
Suggested Solution
Select images only from the same
camera type before cropping.
Choose the Click Balance tool
again and then click a white area
that is not overexposed. (Refer to
the explanation of the Click
Balance tool earlier in this chapter.)