Dvi Lcd Panel Connector(Cn9); Table 2.7: Cn9: Dvi Connector; Tv-Out Interface (Cn2) (Tv Out Optional By Request); Ethernet Configuration (Cn11) - Advantech INTEL PCM-9587 User Manual

2.17.3

DVI LCD panel connector(CN9)

Digital Visual Interface (DVI) is the standard interface for high-performance connec-
tion between PCs and Flat Panel Displays, Digital CRT displays, Projectors, and
HDTV. The PCM-9587 is able to drive a DVI connector display at a pixel resolution up
to 1600 x 1200 at 85Hz.
Panel type and Resolution mode selection
Customer can select display type and boot number from BIOS menu selection.

Table 2.7: CN9: DVI connector

PIN Signal
1 C0#
3 C0
5 GND
7 C1#
9 C1
11 GND
13 C2#
15 C2
17 VCC_DVI
19 NC
2.18 TV-out interface (CN2) (TV out optional by
request)
The PCM-9587 board provides TV-out function via CN2. This consists of a 5-pin
wafer box header. Output supports composite video, S-video and SCART(RBG). TV-
out generators use both NTSC and PAL formats.It supports up to 1024 by 768 with
full vertical and horizontal underscan capability.
To set up your video interface run the appropriate installation program located on the
utility disk.
2.19

Ethernet configuration (CN11)

The PCM-9587 is equipped with a high performance 32-bit PCI-bus Ethernet inter-
face which is fully compliant with IEEE 802.3U 10/100Mbps CSMA/CD standards. It
is supported by all major network operating systems.
2.19.1

100Base-T connector (CN11)

10/100Base-T connects to the PCM-9587 via an adapter cable to a 10-pin polarized
header (CN11).
2.19.2

Network boot

The Network Boot feature can be utilized by incorporating the Boot ROM image files
for the appropriate network operating system. The Boot ROM BIOS files are included
in the system BIOS, which is on the utility CD disc.
PIN Signal
2 VCC_DVI
4 CK#
6 CK
8 GND
10 DVI_CLK
12 DVI_DATA
14 HP_DET
16 MI2C_DATA
18 MI2C_CLK
20 NC
15 PCM-9587 User Manual