Usb Connectors (Cn21); Gpio (Cn6); Table 2-13: Watchdog Timer Action (J2) - Advantech PCM-9576F User Manual

Table 2-13: Watchdog timer action (J2)

J2
* default setting

2.22 USB connectors (CN21)

The PCM-9576F board provides two USB (Universal Serial Bus)
interfaces which gives complete plug and play, hot attach/detach for
up to 127 external devices. The USB interfaces comply with USB
specification rev. 1.0 and are fuse protected.
The USB interfaces are accessed through a 5 x 2 -pin flat-cable
connectors, CN21. You will need an adapter cable if you use a standard
USB connector. The adapter cable has a 5 x 2 -pin connector on one
end and an USB connector on the other.
The USB interfaces can be disabled in the system BIOS setup.

2.23 GPIO (CN6)

The PCM-9576F supports general purpose out; CN6. The 3 digital
outputs can control output devices by programming.
* System reset IRQ11
Chapter 2 Installation 3 1