Installing The Wings - ROBBE Arcus V-Tail EDF ARF Building And Operating Instructions

7
Fig. 7
- The illustration shows the assembled V-tail with linkages.
10
Fig. 10
- The illustration shows the completely installed ducted fan
unit with motor hatch. A magnetic catch secures the hatch
to the fuselage in operation.
Building and Operating Instructions Arcus V-Tail EDF
8
Fig. 8
- Cut the aileron servo cover so that they fit into the cut-outs
in the foam servo mounts.
11
Fig. 11
- Insert the left hand wing and servo lead into the fuselage
opening. Slide the small connecting tubes through the right
hand fuselage side and into the left hand wing. Insert the
right hand wing onto the wing spar. Feed the servo lead
through the fuselage opening and slide the wing fully on
until it touches the fuselage.
9
Fig. 9
- Once the covers have been fitted, fix these to the wings
using strips of adhesive tape (see illustration).
- Repeat stages 8 and 9 on the other wing panel.
12
Fig. 12
- Insert the wing fixing plate and attach using the supplied
screw to the fuselage.
No. 2592
5