Front Panel Leds - ZyXEL Communications Prestige 623R-T Quick Start Manual

PORT
USB
RESET

Front Panel LEDs

When the Prestige is turned on, the PWR LED turns on. The SYS and USB LEDs blink
while performing system testing. The SYS LED then turns steady on if the testing is
successful. The appropriate LAN and/or USB LEDs turn on if they are properly
connected.
This Quick Start Guide provides a basic configuration that should be compatible with
your home or small office network setup. Refer to the User's Guide for additional
configuration instructions.
USB/LAN IP Address
Subnet Mask
DHCP IP Pool
Prestige 623R-T ADSL Dual-link Router
The USB port is useful if you have a USB-enabled computer that
does not have a network interface card for attaching to your Ethernet
network. Refer to the Installing the USB Driver section.
You only need to use this button if you've forgotten the Prestige's
password. It returns the Prestige to the factory defaults (password is
1234, LAN IP address 192.168.1.1 etc. see your User's Guide for
details).
Prestige Factory Defaults
PRESTIGE FACTORY DEFAULTS
192.168.1.1
255.255.255.0
192.168.1.33 – 192.168.1.64
CONNECTION
Default User name
Default Password
4
admin
1234