Table of Contents
Advertisement
The Prestige automatically times out after five minutes of
inactivity. Simply log back into the Prestige if this happens to
Internet Access Using the Wizard
Use the Wizard Setup screens to configure your system for Internet access settings and
fill in the fields with the information in the Internet Account Information table. Your ISP
may have already configured some of the fields in the wizard screens for you.
In the Site Map screen click Wizard Setup to display the first wizard screen.
1.
Figure 1 Wizard Screen 1
The second wizard screen varies depending on what mode and encapsulation type
2.
you use. All screens shown are with routing mode. Configure the fields and click
Next to continue.
Prestige 623R-T ADSL Dual-link Router
you.
From the Mode drop-down list box,
select Routing (default) if your ISP
allows multiple computers to share an
Internet account. Otherwise select
Bridge.
Select the encapsulation type your ISP
uses from the Encapsulation drop-
down list box. Choices vary depending
on what you select in the Mode field.
Select the multiplexing method used
by your ISP from the Multiplex drop-
down list box.
Enter the correct Virtual Path Identifier
(VPI) and Virtual Channel Identifier
(VCI) numbers supplied by your ISP in
the VPI and VCI fields. These fields
may already be configured.
Click Next.
18
Advertisement
Table of Contents
