Checking/Updating Your Computer's Ip Address; Testing The Connection To The Prestige - ZyXEL Communications Prestige 623R-T Quick Start Manual

6. Remove any previously installed
gateways in the IP Settings tab and
click OK to go back to the Internet
Protocol TCP/IP Properties screen.
7. Click Obtain DNS server address
automatically if you do not know your
DNS server IP address(es).
If you know your DNS server IP
address(es), click Use the following
DNS server addresses, and type them
in the Preferred DNS server and
Alternate DNS server fields.
If you have previously configured DNS
servers, click Advanced and then the
DNS tab to order them.
8. Click OK to close the Internet Protocol (TCP/IP) Properties window.
9. Click OK to close the Local Area Connection Properties window.
Refer to your User's Guide for detailed IP address configuration for other Windows and
Macintosh computer operating systems.

Checking/Updating Your Computer's IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command
Prompt.
2. In the Command Prompt window, type "ipconfig" and then press ENTER to verify
that your computer's static IP address is in the correct subnet (in the range
between 192.168.1.2 and 192.168.1.254 if using the default Prestige LAN IP
address). Alternatively, to have the Prestige assign your computer a new IP
address (from the IP pool), make sure your Prestige is turned on, type "ipconfig
/renew" and then press ENTER.

Testing the Connection to the Prestige

1. Click Start, (All) Programs, Accessories and then Command Prompt.
2. In the Command Prompt window, type "ping" followed by a space and the IP
address of the Prestige (192.168.1.1 is the default).
Prestige 623R-T ADSL Dual-link Router
15