ZyXEL Communications Prestige 623R-T Quick Start Manual page 25

PROBLEM
I cannot access
the web
configurator.
I cannot ping
any computer on
the LAN.
I cannot get a
WAN IP address
from the ISP.
I cannot access
the Internet.
Prestige 623R-T ADSL Dual-link Router
The default user name is "admin" and the default password is
"1234". If you have changed the password and have forgotten, you
need to reset the Prestige. See User's Guide.
Make sure you type in the correct IP address. The default LAN and
USB IP address is 192.168.1.1. If you changed the Prestige default
IP address then enter the new one as the URL.
Check that your computer IP address and the Prestige IP address
are on the same subnet.
If all of the LAN LEDs are off, check the cables between the
Prestige and your computer or hub.
Check the TCP/IP configuration on your computer. Make sure that
the IP address and the subnet mask of the Prestige and the
computer are in the same range.
The WAN IP is provided after the ISP verifies the MAC address,
host name or user ID.
Find out the verification method used by your ISP and configure the
corresponding fields.
Make sure the Prestige is turned on and connected to the network.
If the Prestige's DSL LED is off, check the cable between the
Prestige and the telephone wall jack.
Make sure you entered your user name correctly. A username
may be case-sensitive.
CORRECTIVE ACTION
25