Wireless Access Control - Planex GW-MF54G2 User Manual

3. Wireless Access Control

Wireless Access Control Mode: Scroll down the list to choose which action you would like to
take to any device with the specific MAC address. You can choose "disable" to disable this
function, "allow listed" to allow only devices with the MAC addresses listed connecting to
GW-MF54G2, or "deny listed" to deny any devices with the MAC addresses listed connecting to
GW-MF54G2.
MAC Address: Please enter the MAC address of the device here.
Comment: You can add some comments, description or information about this MAC address.
Apply Changes
Reset I f there is anything wrong with the settings you made, you can click
： ： ： ：
configure the page again.
Current Access Control List: You can check the list of all the MAC address you added. If you
would like to delete a MAC address from the list, please click the check box on the right side of
that MAC address, and click "Delete Selected". If you want to delete all the MAC addresses on
the list, please click "Delete All".
Apply Changes
Reset I f there is anything wrong with the settings you made, you can click
： ： ： ：
configure the page again.
C lick this button to save the settings and restart GW-MF54G2.
： ： ： ：
C lick this button to save the settings and restart GW-MF54G2.
： ： ： ：
r eset to
" "
r eset to
" "