Dhcp - Planex GW-MF54G2 User Manual

4.2. DHCP

If you are connecting to the Internet via DHCP, please configure GW-54MFG2 as the following steps.
Attain DNS Automatically/Set DNS Manually: Click "Attain DNS Automatically", and
GW-MF54G2 will attain DNS automatically. Click "Set DNS Manually", and set DNS in the fields
down below manually.
DNS Server 1/2/3
second and third DNS address as well. However, this is option and you may leave it blank.
Clone MAC Address: The default MAC address of GW-MF54G2 is the Network Interface Card's
(NIC) MAC address on the WAN side. If you were asked to use the NIC provided by the ISP, you
may click "Enable" and enter the MAC address of NIC provided by the ISP. We do not suggest
you to change the default MAC address, if your ISP does not ask you to change it.
Respond to WAN Ping: Ping is a common and useful tool to know the connection status of a
specified remote network device, but some malicious intruder will try to fill your network
bandwidth with a lot of PING request data packet, to make your internet connection become very
slow, even unusable. Check this box and the router will reply all inbound PING request, and when
you activate this function, not only you but all the users will be able to ping your router from
Internet.
Enable UPnP: If your operating system supports this function, you may check to enable it.
Enable IPsec pass through on VPN connection: Click the check box to enable the encryption
function.
Enable PPTP pass through on VPN connection: Click the check box to enable the encryption
function.
Enable L2TP pass through on VPN connection: Click the check box to enable the encryption
function.
Apply C lick this button to save the settings.
：
E nter the DNS Server's address provided by your ISP. You can enter the
：