Gw-Mf54G2 Router Mode Setup - Planex GW-MF54G2 User Manual

3.2. GW-MF54G2 Router Mode Setup

1. Unwrap the package of GW-MF54G2 Wireless Router and check if the components are intact and
without missing anything.
2. Choose an Installation Site.
Select a suitable place on the network to install GW-MF54G2 Wireless Router. And make sure that
the Wireless Router and the DSL/Cable modem are not powered on yet.
For best Wireless reception and performance, the Wireless Router should be positioned
in a central location with minimum obstructions between the GW-MF54G2 and the PCs.
Also, if using multiple Access Points, adjacent Access Points should use different
Channels.
3. Set the switch on GW-MF54G2 to Router Mode.
4. Connect LAN Cables.
Use standard LAN cables to connect DSL or cable modem to Ethernet ports on GW-MF54G2. Both
10 Base-T and 100 Base-T connections can be used. Note: In order to connect GW-MF54G2
with your computer, a wireless network interface card is required.
5. Power On.
Power the DSL or Cable modem on. Connect the adapter with GW-MF54G2 and plug the other side
of the power cord into the power socket to power on it. While detecting, the Power LED will be on,
and Ethernet LEDs will be blinking when GW-MF54G2 is transmitting files.
Plug the AC Adapter which comes with GW-MF54G2 in a different voltage power
supply will cause damage on GW-MF54G2, and it is not included in warranty.