Other; Upgrade Firmware - Planex GW-MF54G2 User Manual

3. Other

You can update your firmware, reboot the system, or change your password in this page.

3.1. Upgrade Firmware

You can upgrade the firmware of GW-MF54G2 via Web Browser.
Be sure that the firmware is stored in your PC's disk and then click "Browse..." to search for the firmware
file which you just downloaded. Click "Open" to use the firmware and click "Apply." After the dialog box
pops up and ask you if you want to continue upgrading the firmware, you can click "OK" to start upgrading
immediately. Upgrading firmware will not change any settings.
It takes about 2~3 minutes to upgrade the firmware. When upgrading, please do not
turn off the power of GW-MF54G2. After finishing upgrading, GW-MF54G2 will restart
automatically.
Browse: Click this button to select the firmware you saved on your computer and upload it.
Upload: Click this button after you selected the firmware you wish to upload.
Reset: If there is anything wrong with the settings you made, you can click "reset" to configure
the page again.
Factory Default: lick this button to have all the settings reset to factory default value.