Table of Contents
Advertisement
Side Panel—Ports
Port
Ethernet
Power
Button
Reset
AP/Router/Converter Switching Mode
If you want to change the operating mode of GW-MF54G2, please do so by the steps
down below:
1. Unplug the power cord of GW-MF54G2.
2. Pull the AP/Router/Converter switch to the mode you would like to choose.
3. Plug the power cord of GW-MF54G2 back.
GW-MF54G2 will apply to the mode you choose after power on.
Use standard LAN cable (RJ-45 connectors) to connect your PC or
modem to this port.
Plug the power cord into this port and the other side of the adaptor
should be plugged into the socket.
Function
Press and hold this button for 10 seconds, all the
Reset to Default
configuration values of GW-MF54G2 will reset to
default.
Pull the switch to switch GW-MF54G2 to AP, Router
and Converter mode.
Function
Usage
Hide quick links:
Advertisement
Table of Contents
