Chapter 6 Main Settings Under "User Functions; Setting System Time And Date - Abus WIRELESS ALARM SYSTEM Operating Instructions Manual

Chapter 6 Main settings under "user functions"

On the ABUS wireless alarm system, you can make a wide range of settings under
"user functions" in addition to entering and deleting user codes (see chapter 5). This
chapter describes the main settings (setting time and date, entering Follow Me numbers,
creating weekly schedules, activating/deactivating local announcements, managing local
voice messages, and programming macro buttons).
The complete user functions menu is shown in chapter 7.
To go to the user functions menu, just press

Setting system time and date

6.1
In order that the ABUS wireless alarm system can operate properly, you have to set
the correct time and date. Only the Grand Master and the Manager can make these
settings.
To enter/change the system time:
1. Under user functions, press [6] for Clocks.
2. Then enter the Grand Master PIN or the Manager PIN and press
3. Select [1] for the system time.
4. Enter the correct time in 24-hour format.
You have two options: You can enter the time via the numeric buttons. OR:
Use the
you have to press the
number you want to change.
5. Press
To enter/change the system date:
1. Under user functions, press [6] for Clocks.
2. Then enter the Grand Master PIN or the Manager PIN and press
3. Select [2] for the system date.
4. Enter the date. Use the
numbers. To switch between settings for date, month and year, press the
5. Press
32
buttons to set all numbers separately. In this case,
to confirm your input.
buttons.
to confirm your input.
.
buttons to select the position of the
buttons to set the corresponding
.
.