Chapter 2 Operating The Abus Wireless Alarm System; Operating Options - Abus WIRELESS ALARM SYSTEM Operating Instructions Manual

Chapter 2 Operating the ABUS wireless alarm system

You have the following ways of operating the ABUS wireless alarm system:
- Locally (on the system, an a control unit, by remote control and with Downloader
Software)
- Remote access (by telephone and Downloader Software)
Voice messages of the ABUS wireless alarm system will simplify operation. The
system also informs you on the LED display and with sound signals.
IMPORTANT:
Voice messages can be deactivated. See also section 6.4 for more information.

Operating options

2.1
The ABUS wireless alarm system can be operated as follows:
•
Locally, using the function keys
•
Locally, using an operating panel. You can extend the ABUS wireless alarm
system by adding up to two wireless operating panels.
•
Locally, using a radio remote control or the installed panic buttons. With the
radio remote control, you can activate/deactivate the system, trigger a panic
alarm, or activate switch outputs.
•
Local operation or remote access with the Downloader Software (DL) from
ABUS. The DL software helps you to program and operate the system and
obtain information about its current state.
•
Remote access using any pushbutton telephone (DTMF, MFV). Operation by
telephone includes: Activating/deactivating the system, controlling switch
outputs (household appliances), listening in and speaking to the object.
The ABUS wireless alarm system also uses voice messages to inform you
about the state of the system.
Locally: By loudspeaker on the control panel
Remote access: The ABUS wireless alarm system reports events by calling
you and playing you a previously recorded voice message.
9