User Functions; Blocking Zones - Abus Terxon MX Operating Instructions Manual

9

User functions

A series of functions can be performed via the control unit.
Summary of user functions.
Input
UK
User code +
Master code +4
User code +5
Master code +6
User code +7
User code +8
User code +9
To perform these functions, you have to enter a valid user
code or master code. Instead of the user code, you can
also point a chip key to the control unit.
Function
Locks a zone
Changes user name and
user code
Displays the event memory
Date and time input
Switches door chime on/off
Tests acoustic and visual
signalling device
Walk test
9.1

Blocking zones

This enables you to block (hide) individual zones to
remove them from surveillance. The zone is blocked once
only (for the next active monitoring period – i.e., until the
next deactivation) and, if required, must be blocked again
the next time you activate the alarm system. Proceed as
follows:
Enter a valid user code. The LCD display shows:
Press: .
The control unit shows:
Now enter the two-digit zone number of the zone you want
to block (i.e., remove from surveillance).
Press: .
The control unit shows:
To block further zones, enter their numbers. To unblock a
zone, re-press the
To quit the display, press the following key:
10
key.
.