Stay Arming - Abus WIRELESS ALARM SYSTEM Operating Instructions Manual

3.1.2 Stay arming

Internal activation arms only the detectors of the outer skin – for example, door/window
contacts and glass breakage detectors (or detectors defined in the installer menu). It
enables you to move freely within a monitored object while the system is internally
activated.
Stay arming
1. Check the READY LED to see if the system can be activated internally.
2. Enter your user PIN and press
now internally activated.
IMPORTANT:
If released (-> Installer menu -> Quick arm), just press the internal arm button
arm the system internally. You do not have to enter your user PIN.
3. If necessary, leave the object and close the door. The operating panel beeps
during the exit delay time. The ACTIVE LED flashes and the OMIT LED lights
up.
IMPORTANT:
If you press
operating panel
If you press the internal arm button
entry/exit zone becomes an instant zone.
4. After the exit delay time expires, the ACTIVE LED lights permanently and the
following message is announced: "System armed at stay" If the system
cannot be activated, the message "Not ready to arm" is played, as described
in section 3.1.1 ("External activation").
18
during the exit delay period, the announcements and beeps
are cancelled.
. All partitions assigned to this PIN are
twice, the entry delay is cancelled – i.e., an
to
on the