Abs (Anti-Lock Brake System) Models Only - Triumph Speed Triple User Manual

ABS (Anti-Lock Brake System)
Models only
Warning
Where fitted, ABS prevents the wheels
from locking, therefore maximizing the
effectiveness of the braking system in
emergencies and when riding on slippery
surfaces. The potentially shorter braking
distances ABS allows under
conditions are not a substitute for good
riding practice.
Always ride within the legal speed limit.
Never ride without due care and attention
and always reduce speed in consideration
of weather, road and traffic conditions.
Take care when cornering. If the brakes are
applied in a corner, ABS will not be able to
counteract the weight and momentum of
the motorcycle. This can result in loss of
control and an accident.
Under some circumstances it is possible
that a motorcycle equipped with ABS may
require a longer stopping distance than an
equivalent motorcycle without ABS.
How to Ride the Motorcycle
ABS Warning Light
When the ignition switch is turned
to the ON position, it is normal for
the ABS warning light to flash on
and off (see page 42). If the ABS
warning light is constantly illuminated it
indicates that the ABS function is not
available because:
• the ABS has been disabled by the
rider (see page 28);
certain
• the ABS has a malfunction that
requires investigation.
If the indicator light becomes illuminated
while riding, it indicates that the ABS has a
malfunction that requires investigation.
Note:
• Normally, the rider will perceive
ABS operation as a harder feel or a
pulsation of the brake lever and
pedal. As the ABS is not an
integrated braking system and it
does not control both the front
and rear brake at the same time,
this pulsation may be felt in the
lever, the pedal or both.
• The ABS may be activated by
sudden
changes in the road surface.
upward or downward
65