Brake Light Switches; Steering/Wheel Bearings; Steering Inspection - Triumph Speed Triple User Manual

Maintenance and Adjustment

Brake Light Switches

The brake light is activated independently by
either the front or rear brake. If, with the
ignition in the ON position, the brake light
does not work when the front brake lever is
pulled or the rear brake pedal is pressed,
have your authorized Triumph
investigate and rectify the fault.
Warning
Riding the motorcycle with defective brake
lights is illegal and dangerous.
An accident causing injury to the rider and
other road users may result from use of a
motorcycle with defective brake lights.
100

Steering/Wheel Bearings

To prevent risk of injury from the
motorcycle falling during the inspection,
dealer
ensure that the motorcycle is stabilized and
secured on a suitable support. Do not
exert extreme force against each wheel or
rock each wheel vigorously as this may
cause the motorcycle to become unstable
and cause injury by falling from its support.
Ensure that the position of the support
block will not cause damage to the sump.

Steering Inspection

Lubricate and inspect the condition of the
steering head
accordance with scheduled maintenance
requirements.
Note:
• Always inspect the wheel bearings
at the same time as the steering
bearings.
Caution
(steering) bearings in