General Information
•
SE
mode:
The
progressively illuminate in 250 rpm
increments until the set limit is
reached. At the set limit all six lights
will be illuminated.
Setting Gearshift Light Limits
The gearshift lights will not operate below
3,500 rpm to avoid the lights operating at
idle.
To change the gearshift light modes, with the
motorcycle stationary and in neutral turn the
ignition to the ON position.
Press and release button 'A' until set up is
visible in the display screen then press
button 'B'.
Press and release button 'A' until SHIFt is
visible then press button 'B'. The current
mode
will
be
displayed
corresponding gearshift lights will illuminate.
Press and release button 'A' until the desired
gearshift light mode is visible then press
button 'B'. The display will scroll through in
the following order:
•
SE (Scale mode);
•
3 (3 LED mode);
•
6 (6 LED mode);
•
OFF (Gearshift lights off).
30
lights
will
Note:
•
The motorcycle is delivered from
the factory with the gearshift light
set to the 6 LED mode at 3,500
rpm.
3
4
and
the
chdo_2
1. Gearshift lights
2. Display screen (3 mode shown)
3. Button A
4. Button B
1
2