Tandy 1000 MS-DOS Reference Manual page 346

Appendix B / Configuring YOur System
CONFIG.SYS Commands
Here is a summary of the commands you can use in your CON-
FIG.SYS file. Following the summary is 'a detailed explanation of
each command. (See Appendix C for information about the var-
ious device drivers you can install using the DEVICE command.)
:-..J
Command
BREAK
BUFFERS
COUNTRY
DEVICE
DRIVPARM
FCBS
FILES
LASTDRIVE
SHELL
322
Purpose
Sets the
I
CTRL
I []]
check.
Sets the number of
disk buffers.
Allows for international time, date, and cur-
rency format and characters.
Installs a
device driver
into the system.
Include one DEVICE command for each
driver you install.
Defines parameters for block devices.
Specifies the number of FCBs
(file control
blocks)
that you can open at one time.
Sets the number of open files that can
access certain MS-DOS system calls.
Sets the maximum number of drives you
can access.
Causes MS-DOS to start a command pro-
cessor other than the standard COM-
MAND.COM processor.
,
,