Tandy 1000 MS-DOS Reference Manual page 295

l ,
,.......,
I
Chapter 13/ The DEBUG Utility
Example
F 04BA:100 L 100 42 45 52 54 41 IENTERJ
causes DEBUG to fill memory locations 04BA:IOO through
04BA:IFF with the bytes specified. The five values are repeated
" until alllOOH bytes are filled.
,
'
i " "
GO
G
[=addressl[address2 ... ]]
Executes a program currently in memory. Execution stops at
specified breakpoints, and the registers, flags, and instruction
line for the next instruction to be executed are displayed.
Parameters
addressl is the start location of the program to be executed.
address2 ... gives the addresses for optional breakpoints.
,
,
,
---,
i
,
\
Notes
• If you include addressl, execution begins at addressl in the
CS segment. The equal sign (
= )
is required.
• If addressl is omitted, the program execution starts at the
current instruction. The address of the current instruction is
determined from the contents of the CS and IP registers.
275