Specifications - Kyocera FS-1020D Service Manual

1-1-1 Specifications

Type ............................................... Desktop
Printing system ............................... Indirect electrostatic system
Paper type ...................................... Cassette: Plain paper (60 - 90 g/m
Paper size ...................................... A4 (210 - 297 mm)
Printing speed ................................ Simplex printing: 20 pages//min. (A4, plain), 21 pages//min. (Letter, plain)
First print ........................................ Within 10 s (A4/Letter), depends on input data
Warm-up time ................................. Within 15 s (room temperature 23°C/73.4°F, humidity 50% RH)
Paper feed system ......................... One universal cassette and one MP tray
Paper loading capacity ................... Cassette: 250 sheets (80 g/m
Paper eject system .........................Face down: 250 sheets (80 g/m
Standard memory .......................... 16 MB, expandable up to 272 MB
Additional memory ......................... 1 slot (16/32/64/128 MB DIMM)
Resolution ...................................... Fast 1200 mode
Photoconductor .............................. OPC (drum diameter 30 mm)
Charging system ............................ Single positive corona charging
Developing system ......................... Single element reversing process
Transfer system ............................. Transfer roller
Fixing system ................................. Heat roller
Charge erasing system .................. Exposure by eraser lamp (LED array)
Cleaning system ............................ Cleaning blade
Controller hardware ....................... CPU: Power PC405 (266 MHz)
MP tray: Plain paper (60 - 90 g/m
Special paper: Transparencies, letterhead, colored paper, recycled paper
Note: Use the MP tray for special paper
B5 (182 - 257 mm)
A5 (148 - 210 mm)
1
Letter (8 / " - 11")
2
1
Legal (8 / " - 14")
2
Folio (210 - 330 mm)
Oficio II (216 - 330 mm)
Non-standard size (148 to 210 mm × 210 to 297 mm: cassette),
(70 to 216 mm × 148 to 297 mm: MP tray)
Duplex printing: 10 pages//min. (A4/Letter, plain)
Note: When printing multiple copies of the same page
MP tray: 50 sheets (80 g/m
600 × 600 dpi, with KIR (Kyocera Image Refinement)
300 × 300 dpi, with KIR (Kyocera Image Refinement)
Heat source: halogen heaters (750 W)
Control temperature: 180°C/356°F (at normal ambient temperature)
Abnormally high temperature protection device: thermal cutout
System ROM: 4 MB
Font ROM: 2 MB (16 Mbit × 1)
Main RAM: 16 MB standard (on-board); expanding up to 272 MB (standard 16 MB +
256 MB) at the maximum by adding optional expansion memory
Optional expansion RAM (DIMM): 1 slot
2 [thick paper mode: 90 - 105 g/m
2 [thick paper mode: 90 - 163 g/m
2
, 0.11 µm)
2
, 0.11 µm)
2
, 0.11 µm)
2FM
2 ])
2 ])
1-1-1