Kyocera FS-1020D Service Manual page 73

2FM
10. Remove the main board (See page 1-6-10).
11. Remove one screw and then remove the grounding plate.
12. Remove one screw and then remove the feed clutch.
13. Remove three stop rings.
14. Remove MP feed clutch (gear), feed clutch (gear), and registration clutch (gear).
MP feed clutch (gear)
Stop ring
Grounding
plate
Feed clutch
Screw
(gear)
Stop ring
Screw
Registration clutch (gear)
Stop ring
Feed clutch
Figure 1-6-18 Removing the clutches
1-6-17