Fujitsu ETERNUS DX400 series Configuration Manual page 16

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
(iSCSI) ETERNUS DX400/DX8000 series Disk Storage System Settings
• The content of this manual is subject to change without notice.
• This manual was prepared with the utmost attention to detail.
However, Fujitsu shall assume no responsibility for any operational problems as the result of
errors, omissions, or the use of information in this manual.
• Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
• The content of this manual may not be reproduced or distributed in part or in its entirety
without prior permission from Fujitsu.
P3AM-3972-08ENZ0
Date of issuance: December 2014
Issuance responsibility: FUJITSU LIMITED