Table of Contents
Advertisement
4. Using the Remote Trainer Unit
4.1
Powering On/Off the Remote Trainer Unit
To power on or off, press and hold POWER KEY
Unit.
4.2
Select a Pet Collar Unit (if you have more than 1 Pet
Collar Unit)
1. Press OK KEY
(1 or 2) to which you wish to send remote commands is displayed.
indicates that collar number 2 is selected.
4.3
Deliver Static Correction
1. Press and hold STATIC CORRECTION KEY
Unit.
2. Press
to increase the level of correction or press
The number corresponding to the current level of correction will appear
beside the
indicates that the current level of correction is 15.
3. The Indicator LED on the Pet Collar Unit lights up in green.
4.4
Determine the TRAINING LEVEL for your Dog
TRAINING LEVEL is the level you use to discourage your dog from engaging in
a particular behavior.
With the Pet Collar Unit properly fitted on your dog and powered on, start with
level 1. This level is extremely low and most dogs will feel very little, if anything
at all.
1. Press and hold STATIC CORRECTION KEY
Unit.
2. Look for signs that your dog is feeling the static correction, such as ears
twitching, looking up or down or a quick shake of the head.
3. If nothing happens, press
Using the Remote Trainer Unit
on the Remote Trainer Unit until the Pet Collar Unit
symbol on the screen.
to go to level 2 and try again.
on the Remote Trainer
on the Remote Trainer
to decrease.
on the Remote Trainer
25
Hide quick links:
Advertisement
Table of Contents
