Pairing The Pet Collar Unit With The Remote Trainer Unit - Motorola TRAVELFENCE50 User Manual

3.3 Pairing the Pet Collar Unit with the Remote Trainer
Unit
Your system can pair with up to 2 Pet Collar Units. The Remote Trainer Unit and
Pet Collar Unit provided are already paired. They will communicate with each
other once they are powered on. You do not need to pair them again unless the
Pet Collar Unit loses its link with the Remote Trainer Unit. To pair them again, or
pair a new Pet Collar Unit, follow the procedures below:
1. Power on both the Remote Trainer Unit and Pet Collar Unit (see "Powering
On/Off the Remote Trainer Unit" on page 25 and "Powering On/Off the
Pet Collar Unit" on page 23).
2. Press MENU KEY
The screen displays a blinking
3. Press and hold PAIR KEY
The Power LED blinks in Green on the Pet Collar Unit.
4. If you have only one Pet Collar Unit, press OK KEY
Trainer Unit once to confirm.
If you have more than one Pet Collar Unit, press
collar number (1 or 2) and press OK KEY
NOTE
To test if the units are linked, press and hold TONE KEY
Trainer Unit. The Pet Collar Unit should emit a beep tone.
24
on the Remote Trainer Unit.
symbol.
on the Pet Collar Unit to start pairing.
on the Remote
or to select a
to confirm.
on your Remote
Using the Pet Collar Unit