Replace Batteries on the Remote Trainer Unit
2.5.1
The unit uses 2x 1.5V AAA-sized alkaline batteries.
Small cross-head
or flat end
screwdriver.
1. Use a small cross-head or flat end screwdriver to unscrew the battery
compartment cover as shown above.
2. Fit the batteries into the compartment in the correct polarity.
3. Close the battery compartment cover and gently tighten the screw in a
clockwise direction using a small cross-head or flat end screwdriver.
4. Press and hold the POWER KEY
16
+
+
to power the unit on or off.
Getting Started