Using The Test Light - Motorola TRAVELFENCE50 User Manual

4. To ensure that the Collar Contacts are securely fastened, fit the test light
over the Collar Contacts and twist clock-wise to tighten them securely as
shown below.

2.11 Using the Test Light

IMPORTANT
If your dog does not appear to feel the lowest level of static correction, check for
proper collar fit and that there is good skin contact where the Collar Contacts
touch the neck area of your dog, before increasing to higher levels.
You can use the Test Light that is supplied with your system to test if the Wireless
Fence Unit or the Remote Trainer Unit is sending static correction to the Pet
Collar Unit.
1. Press and hold POWER KEY
The unit vibrates once and the Power LED lights up in green for 3 seconds.
2. Fit the Test Light Contacts over the Collar Contacts on the Pet Collar Unit.
Collar Contacts
3. To test if the Remote Trainer Unit is sending static correction to the Pet
Collar Unit, press and hold STATIC CORRECTION KEY
Remote Trainer Unit.
Getting Started
Twist clockwise to
tighten the Collar
Contacts securely.
on the Pet Collar Unit to power it on.
Test light
contacts
Test light
contacts
on the
21