Table of Contents
Advertisement
3. Using the Shock-Free No-Bark Ball with
Dual Sonic Technology
3.1
Powering On/Off the unit
To power on, press and slide the POWER/SELECTION switch
The Indicator LED lights up in blue for 3 seconds when it is powered on and
flashes slowly during standby.
To power off, press and slide the POWER/SELECTION switch
3.2
Select Correction Level
Your No-Bark Ball is a smart bark detection device. If there is a bark from your
dog, it releases ultrasonic sound automatically for 3 seconds at the level you
have selected to discourage or stop your dog from barking.
To adjust correction level, simply press and slide the POWER/SELECTION
switch
to the level you wish to set (from 1 to 3).
Level
What it does....
1
Releases a low ultrasonic sound.
2
Releases a medium ultrasonic sound.
3
Releases a high ultrasonic sound.
The Indicator LED flashes quickly in blue when emitting ultrasonic sound.
3.3
Emit Ultrasonic Correction Manually
Your No-Bark Ball emits ultrasonic sound automatically every time your dog
barks. You can also press a button to release ultrasonic sound manually
whenever your dog misbehaves, such as getting on a couch or bark at your
guests.
To emit ultrasonic correction manually, press and hold the MANUAL
ULTRASONIC BUTTON
selected in 3.2 Select Correction Level.
The Indicator LED flashes quickly in blue when emitting ultrasonic sound.
Using the Shock-Free No-Bark Ball with Dual Sonic Technology
. It will emit ultrasonic sound at the level you have
to
.
to OFF.
9
Advertisement
Table of Contents
