Table of Contents
Advertisement
3. Using the Pet Collar Unit
3.1
Powering On/Off the Pet Collar Unit
To power on, press and hold the POWER KEY
The Power LED will light up in green for 5 seconds.
To power off, press and hold the POWER KEY
the green Power LED light goes off.
3.2
Pairing with the Remote Control Unit
Your Remote Training System can pair with up to 2 Pet Collar Units. The Remote
Control Unit and Pet Collar Unit provided are already paired. They will
communicate with each other once they are powered on. You do not need to
pair them again unless the Pet Collar Unit loses its link with the Remote Control
Unit. To pair them again, follow the procedures below:
1. Power on both the Remote Control Unit and Pet Collar Unit (see "Powering
On/Off the Remote Control Unit" on page 17 and "Powering On/Off the
Pet Collar Unit" on page 16).
2. Press and hold the PAIR KEY
The Power LED flashes in Green on the Pet Collar Unit and the Remote
Control Unit displays a flashing
3. Press the TONE KEY
to complete the pairing process.
NOTE
To test if the units are linked, press and hold the TONE KEY
Remote Control Unit. The Pet Collar Unit should emit a beep tone.
16
on the Pet Collar Unit.
symbol.
on the Remote Control Unit within 12 seconds
on the Pet Collar Unit.
on the Pet Collar Unit until
on your
Using the Pet Collar Unit
Hide quick links:
Advertisement
Table of Contents
