Router Bits - Titan SF1500XP Safety And Operating Manual

Fig 17
Fig 18
Note: The eage
should be upward
Fig 19
Fig 20
provided by the template manufacturer.
12. CHANGING THE ROUTER BIT
Press the spindle lock and get the spindle to latch
in place. Loosen the collet nut with the open-
ended spanner. Change the router bit and tighten
the collet nut with the spanner.
Note: Remove all adjustment and assembly tools
before starting the machine.

Router Bits

Use bits only with 6.35mm(1/4 inch),8mm(1/3
inch), 12.7mm (1/2 inch)shanks with one of the
supplied collets to suit. Most bits are available in
two grades.
HSS (High Speed Steel) - for softwood use.
TCT (Tungsten Carbide Tipped) - for use on
hardwood, chipboard, plastics or aluminium.
The most commonly used bits are listed below.