Removable Media Blanking Panel - Compaq ProLiant ML570 Maintenance And Service Manual

2-26 Compaq ProLiant ML570 Maintenance and Service Guide

Removable Media Blanking Panel

To remove a removable media blanking panel:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the access panel. See "Access Panel (Tower and Rack)" earlier in this chapter.
3. Slide the green locking lever
blanking panel.
4. Pull the removable media blanking panel
Figure 2-17. Removing a removable media blanking panel from the removable media area
Reverse steps 1 through 4 to install a removable media blanking panel.
on the outside of the removable media area to release the


1
from the removable media area.

2