2-16 Compaq ProLiant 8000 Intel Pentium III Xeon 700MHz Servers Maintenance and Service Guide
Removable Media Blanking Panel
To remove a removable media blanking panel from the removable media area:
1. Remove the removable media trim. See "Removable Media Trim" earlier in this chapter.
2. Remove the two T-15 screws securing the blank bezel to the chassis
3. Pull the blanking panel away from the front of the server
Figure 2-11. Removing a removable media blanking panel
Reverse steps 1 through 3 to replace the removable media blanking panel.
.
2
1
1
.