Processor Cage - Compaq ProLiant ML570 Maintenance And Service Manual

2-50 Compaq ProLiant ML570 Maintenance and Service Guide

Processor Cage

To remove the processor cage:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the access panel. See "Access Panel (Tower and Rack)" earlier in this chapter.
3. Remove all processors and terminator boards. See "Processors" and "Terminator Boards"
earlier in this chapter.
4. Remove the 13 T-15 screws
5. Lift the processor cage
Figure 2-40. Removing the processor cage
Reverse steps 1 through 5 to replace the processor cage.
securing the processor bracket to the electronics tray.


from the electronics tray.

1
1
2