Audio Adjustments; Audio Control; Audio Setup - Kenwood KDC-X993 Instruction Manual

Audio Adjustments
Audio Control
You can adjust following Audio Control items;
Ad~e1!;I~DiSpl~r;
•....•. \;:
:bllg~;::.:'(;
: . •
:.'!' .'., . ' .
Rear volume "REAR VOLUME" 0- 35
- - - - - - -
Subwoofer level "SUBWOOFER LEVEl" -15 -
+
15
--:---~---
Balance "BALANCE" Left 15 - Right 15
Fader "FADER" Rear 15 - Front 15
Exit Audio Control mode (Volume control mode)
1
Enter Audio Control mode
Press the [AUO] knob.
2
Select the Audio item to adjust
Press the [AUO] knob.
3
Adjust the Audio item
Turn the [AUO] knob.
4
Exit Audio Control mode
Press any button.
Press a button other than the [AUD] knob or
[~]
button.
Audio Setup
You can set Sound system
1
such as follows;
Adj"f~t,nr;: QJi.lii;;;]r:;; 6AAg~!y . . . :" <~:
..
Volume offset "VOL-OFFSET" -8 - ±O (AUX -8- +8)
Dual Zone System "2 ZONE" OFF/ON
~
~
• Volume offset: Sets each source's volume as a difference
from the basic volume.
Dual Zone System
Main source and sub source (Auxiliary input) output
Front channel and Rear channel separately
- Set up the channel of sub source by "ZONEr of
<Function Control> (page 6)
- Select Main source by [SRC] button.
- Adjust the volume of Front channel by [AUD] knob.
- Adjust the volume of Rear channel by <Audio Control>
(page 28) or [A]/["'] button on the remote control
(page 43).
- The Audio Control has no effect on sub source.
1
Select the source to adjust
Press the [SRC] button.
2
Enter Audio Setup mode
Press the [AUO] knob for at least 1 second.
3
Select the Audio Setup item to adjust
Press the [AUO] knob.
4
Adjust the Audio setup item
Turn the [AUO] knob.
S
Exit Audio Setup mode
Press the [AUO] knob for at least 1 second.
28 I
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U