Registering to the Preset Dial Number List (Preset Memory) Speed Dialing (Preset Dial) Receiving a Call During a Call Call Waiting Other Functions Display of Phone Number Type (Category) Audio Adjustments Audio Control Display Settings Display Selection Text Scroll Display Setting Auxiliary Input Display Setting KDC-U546BT...
• When you purchase optional accessories, check with To prevent a short circuit, never put or leave any your Kenwood dealer to make sure that they work metallic objects (such as coins or metal tools) inside with your model and in your area.
8 [1] – [6] button To recall the memorized station. Switches the play mode between music discs, audio files, and iPod. 9 [VOICE] button To make a voice dialing call. To change text scroll. (press the button at least 1 second) KDC-U546BT...
General operation Before Using Function Setting Operation The basic operating procedure for using this Exit of the Demonstration Mode function is described below. The individual function Turn off the demonstration mode when you use it items are covered in the operating procedures. for the first time after installation.
Press the [0] button for at least 2 seconds can be entered to the USB Remove mode (“USB REMOVE” is displayed) and the USB device, iPod can be removed safely. Selecting CD, USB or iPod source Press the [SRC] button. Select the “CD”/“USB” or “iPod” display. KDC-U546BT...
⁄ • * This operation is effective only for the files registered in the database created with KENWOOD Music Editor. • The time required to turn on the all random function may become longer depending on the number of songs in iPod.
Registering Songs in the Playlist • You can also delete all songs from the Playlist by selecting “MPLIST DELETE” described in <Audio File/iPod Play the song you want to register Setting> (page 9). Press the [BAND], [4], and [¢] button. KDC-U546BT...
⁄ songs in the list which is selected. (iPod and KENWOOD Music Editor File only) • Direct Music Search cannot be performed during playing 0.5%/1%/5%/10% of iPod, “Music Editor” media, Random play, or scan play.
[1] – [6] button according to the setting of “PRESET TYPE” of <Initial Setting> (page 18). • * This setting can be made when “TYPE NORMAL” is selected for the “PRESET TYPE” of <Initial Setting> (page 18). KDC-U546BT...
Function of remote control Direct Access Tuning Tuning in a desired radio station by entering the frequency. Enter Direct Access Tuning mode Press the [DIRECT] button. “– – – –” is displayed. Enter the frequency Press the number buttons. Example: Desired frequency Press button 92.1 MHz (FM)
By operating the Bluetooth device, register the “IN-CALL” Calling a number in the incoming call list. hands-free unit (pairing). Select “KENWOOD BT “MISSED CALLS” Calling a number in the missed calls list. CD/R-3P1” from the list of connected units. “NUMBER DIAL”...
Select the name Make a call • Press the [VOL] knob. Operation type Operation • Press the [OK] button on the remote Move to the next phone Turn the [VOL] knob. controller. number. ⁄ Move to the next name. Press the [4] or [¢] button. •...
(Category) Adjusting the Voice Volume during a Call The category items in the Phone Book are displayed Turn the [VOL] knob. as follows. Display Information “GE” General “HM” Home “OF” Office “MO” Mobile “OT” Other KDC-U546BT...
Audio Adjustments “SUB-W LEVEL” You can set subwoofer level. [SRC] [VOL] –15 — 0 — +15 “DETAILED SET” Move to detailed item “LPF SUBWOOFER” Selects cut off frequency of subwoofer output. 85/120/160/THROUGH (OFF) Hz “SUB-W PHASE” Selects the phase of subwoofer output. REVERSE (180°)/ NORMAL (0°) “SUPREME SET”...
Play time & Music number “P-TIME” Clock “CLOCK” In CD source Information Display Disc title “DISC TITLE” Track title “TRACK TITLE” Play time & Track number “P-TIME” Clock “CLOCK” In Standby/ Auxiliary input source Information Display Source name “SOURCE NAME” Clock “CLOCK” KDC-U546BT...
Display Setting Auxiliary Input Display Setting You can select following Display Setting items. Selecting the display when changing to Auxiliary input source. Enter Function Setting mode Press the [VOL] knob for at least 1 second. Select the AUX source “FUNCTION” is displayed. Press the [SRC] button.
Cancel the attenuator function Select “DEMO MODE”. by turning the volume knob clockwise when listening to the audio of the external equipment. OFF: Disables the selection of AUX source. Set to OFF when not using the AUX terminal. KDC-U546BT...
MEDIA CD: Select CD. For how to update the firmware, access our web site. ¤ http://www.kenwood.com/cs/ce/ • After pressing the Release button, detach the faceplate (Factory setting: Underlined) immediately. If the faceplate is left attached, it can fall Make a setting due to vibration and so on.
“DEVICE DELETE” Cancel registration of the Bluetooth device. Refer to <Deleting a Registered Bluetooth Device> (page 21). “PIN CODE EDIT” Specify the PIN code required when registering this unit using the Bluetooth device. Refer to <Registering PIN Code> (page 22). KDC-U546BT...
Registering Bluetooth Device (Pairing) Enter Special device registration mode Press the [VOL] knob. To make your Bluetooth device (cell-phone) usable A list is displayed. with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Select a device name Turn the [VOL] knob and press it when the Registering from this unit...
Enter Bluetooth Firmware update mode Press the [VOL] knob. The firmware version appears. Exit Function Setting mode Press the [ ] button for at least 1 second. ⁄ • For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/ KDC-U546BT...
Selecting the Bluetooth Device You Downloading the SMS Wish to Connect Download the short message (SMS) arrived at the cell-phone so that it can be read on this unit. When 2 or more Bluetooth devices have already been registered, you need to select the Bluetooth Select SMS download mode device you wish to use.
Press the [VOL] knob. Return to step 3. You can register another voice tag continuously. ⁄ • If your voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. (page 35) KDC-U546BT...
Select “PB NAME CHK” (Play) Press the [VOL] knob. Play the registered voice and return to step 3. Select “PB NAME DEL” (Delete) Delete a voice tag Press the [VOL] knob. Turn the [VOL] knob to select “YES”, and then press the [VOL] knob.
[SRC] button In Tuner Source Continue the Current Call [1] button Band select [FM+]/[AM–] button Station select [4]/[¢] button During a call Recall preset stations [1] — [6] button End the call [SRC] button Adjust the voice volume [VOL] button KDC-U546BT...
Page 27
Preparing the remote control unit Pull the battery sheet out from the remote control unit to the direction of the arrow. Changing the battery of the remote control unit Use a commercially available button battery (CR2025). Insert something narrow like a paperclip into the hole and pull out the battery tray.
• When the USB device is connected to this unit, correct title, etc. it can be charged up provided that this unit is • You cannot operate iPod if “KENWOOD” or “✓” displayed on powered. iPod. • Install the USB device in the place where it will not prevent you from driving your vehicle properly.
Page 29
KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from • The Bluetooth word mark and logos are owned by the following web site: the Bluetooth SIG, Inc.
Accessories/ Installation Procedure with battery wires, the battery may die. Accessories • If the console has a lid, make sure to install the unit so that the faceplate will not hit the lid when closing and opening. • If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
Installation/Removing the Unit Non-Japanese Cars Removing the Hard Rubber Frame Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure. Lock Catch Bend the tabs of the mounting sleeve with a screwdriver or similar...
The specified disc does not play, but another one plays instead. ✔ The specified CD is quite dirty. ☞ Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). ✔ The disc is severely scratched. ☞ Try another disc instead. KDC-U546BT...
Page 35
NO MUSIC DATA/ERROR 15: The messages shown below display your • The connected USB device contains no systems condition. playable audio file. • Media was played that does not have data TOC ERROR: • No disc has been loaded in the disc recorded that the unit can play.
: 20 Hz – 20 kHz Total Harmonic Distortion (1 kHz) : 0.01 % Signal to Noise Ratio (1 kHz) : 105 dB Dynamic Range : 93 dB MP3 Decode : Compliant with MPEG-1/2 Audio Layer-3 WMA Decode : Compliant with Windows Media Audio KDC-U546BT...
Page 37
USB Interface General USB Standard Operating Voltage : USB1.1/ 2.0 (Full Speed) : 14.4 V (10.5 – 16V allowable) File System Maximum Current Consumption : FAT16/ 32 : 10 A MP3 Decode Installation Size (W x H x D) : Compliant with MPEG-1/2 Audio Layer-3 : 182 x 53 x 155 mm WMA Decode Weight...